Evaporated Residues Tester

View larger

Evaporated Residues Tester

PKT-ZF800B

This instrument tests the dissolving-out amount of test sample soaked in specified liquid. Applicable to tableware, food container, packaging film, cap sealing rubber pad, painted coating for inner wall of cans, plant fiber container and so on made from polyethylene, polystyrene, polypropylene, perchloroethylene resin, epoxy novolac etc.; also applicable for some chemical reagents.

More details

More info

This instrument tests the dissolving-out amount of test sample soaked in specified liquid. Applicable to tableware, food container, packaging film, cap sealing rubber pad, painted coating for inner wall of cans, plant fiber container and so on made from polyethylene, polystyrene, polypropylene, perchloroethylene resin, epoxy novolac etc.; also applicable for some chemical reagents.

Working Principle
After test sample soaked in specified liquid, hold an amount of the liquid in evaporating dish, evaporate and dry the dish in high temperature, then weigh the dish; then dry again, and weigh again, repeat this process until the weight is constant; calculate Evaporated Residues according to the measured weight minus the weight of evaporating dish itself. Unit is mg/L.

Standards
GB/T 5009.60-2003, GB/T 5009.64-2003, GB/T 5009.68-2003, GB/T 5009.69-2008, GB/T 5009.203-2003, GB/T 9740-2008

Features

  • Only need to manually make sample and put liquid sample in machine's sample pot; after this, injecting sample, evaporating, drying, weighing, repeating process, constant weight judgment, and calculation are all automatically done by system.
  • Evaporation, drying and weighing are all done in machine chamber.
  • 8 work stations, each with independent test data; can test 8 samples at the same time.
  • LCD display test data.
  • Automatic temperature control.
  • Heating system is outside test chamber, no high voltage electricity inside chamber, safety ensured.
  • Testing is done in closed system, exhaust entering vacuum recycle system, not discharged outside machine.
  • Can add sample into sample pot during testing, no need to pause and take out evaporating dish.
  • Over temperature alarm, task completion alarm.
  • With carrier gas supplied, can make quick test.
  • Simple calibration of weight and temperature sensors.
  • Professional software, simple interface, easy to use.
  • Real time display weight, residue rate, temperature, humidity etc. for each work station.
  • Professional test report.

Software Interface

Specifications


Test range

0~80g (residue weight)

Test precision

0.2mg

Resolution

0.1mg

Temperature range

80~130℃

Temperature precision

±0.2℃

Heated air circulation speed

0.2 m/s

Test sample volume

0~200mL

Gas source

high purity nitrogen, ≥0.1Mpa

Gas port

Φ6mm gas pipe

Instrument size

85×58×82cm

 

Configuration

Evaporated Residues Tester, software, communication cable, power cable, evaporating dish 8pcs, 200g weight

1 other products you may be interested: