Hot Tack Tester
- Products
- Petroleum & Oil Testing
- Flash Point Tester
- Engler Viscometer
- Water Content Tester
- Kinematics Viscometer
- Distillation Tester
- Density Tester
- Rust & Corrosion Tester
- Sulphur Content Tester
- Acid & Alkali Tester
- Dropping Point Tester
- Demulsibility Tester
- Aniline Point Tester
- Ash Content Tester
- Low Temperature Tester
- Residue Carbon Tester
- Existent Gum Tester
- Vapor Pressure Tester
- Oxidation Stability Tester
- Foaming Characteristic Tester
- Bomb Calorimeter
- Octane & Cetane Analyzer
- Other Tester
- Tablet Drug Tester
- Dissolution Tester
- Disintegration Tester
- Tablet Hardness Tester
- Friability Tester
- Multi-Purpose Tester
- Clarity Tester
- Gelatin Gel Strength Test System
- Bloom Viscosity Tester
- Thaw Tester
- Melting Point Tester
- Moisture Tester
- Transparency Tester
- Vacuum Constant Temperature Drying Case
- Transdermal Diffusion Tester
- Gelatin Freezing Strength
- Refrigeration & Cryogenic
- Life Sciences
- Laboratory
- Spectrometer
- Spray Dryer
- Rotary Evaporator
- Reactor
- Sterilizing & Cleaning
- Water Quality Analyzer
- Chemical Analysis
- Physical Testing
- Centrifuge
- Pathology Equipment
- Optical
- Ultrasonic Homogenizer
- Packaging Testers
- Compression Testing Machine
- Water Vapor Permeability Tester / Moisture Permeability Tester
- Air Permeability Analyzer
- Tearing Tester
- Heat Sealer
- Seal Tester
- Oxygen Permeability Tester
- Friction Tester
- Falling Dart Impact Tester
- Horizontal Impact Tester
- Pattern Thickness Tester
- Evaporated Residues Tester
- Inverted Pressure Sterilized Boiler
- Electronic Tensile Tester
- Heat Shrink Tester
- Leakage Tester
- Hot Tack Tester
- Disc Peeling Tester
- Roller Pressing Machine
- Sample Cutter
- Spectrodensitometer
- Hot Sticky Pull Tester
- NDT
- Agriculture & Food
- Hazardous Chemical Detection
- Fusion Machine
- Testing Chamber
- Filter Integrity Tester
- Petroleum & Oil Testing
- Industry Testing Device
- Featured
More info
This instrument tests the hot tack strength of plastic film after heat sealed in different conditions of temperature, pressure and time.
Working Principle
Heat seal two layers of test sample, then pull and tear it off by a tear bar at the heat seal point; measure the force of tearing to evaluate the hot tack strength.
Standards
ASTM F1921, ASTM F2029, QB/T 2358, YBB 00122003
Product Features
- LCD display test data.
- Upper and lower heat seal bars can set different temperatures.
- Use compressed air, pneumatic drive.
- Built-in printer, can print report.
- Can customize size, shape and smoothness of heat seal bar.
Specifications
Temperature range | maximum 250℃ |
Temperature precision | ±0.2℃ |
Pressure range | 0.04~0.8Mpa |
Time range | 0.01s~99.99h |
Heat seal area | upper and lower bars 100×5.5mm |
Force range | 0~300N |
Gas source | compressed air, 0.4~0.8Mpa |
Gas port | Φ8mm gas pipe |
Instrument size | 63×30×34cm |
Configuration
Hot Tack Tester, power cable
User provide: compressed air