Computer Automatic Tissue Processor (1.8L-2.0L, Environment-friendly)

Features: 
1. The surface of the machine is coated with APS plastic, which is of high strength, corrosion resistance, smooth lines and elegant appearance, easy to clean; 
2. LCD display in English interface, multiple sets of operating control procedures, and man-machine dialogue to enable easier operation, organic glass cover and using gas efflux device that is of good sealing environment-friendly;
3. All intelligent design, automatically judge and handle abnormalities in time; 
4. Full of rolling and scroll-off man-machine dialogue interface that prompts you every step at the operation; 
5. Can freely set the time for starting, and the machine can automatically calculate the completion time to ensure that work can be done in a required time;
6. With 10-90S adjustable Leachate residence time, leachate and shaking liquid on the surface of cylinder to reduce tissue leaking and dirt on working table as well as extend the using time of solution;
7. 0-12 times / min adjustable mixing times (0 refers to no stirring), to ensure that more thorough and uniform immersion of all the tissues;
8. Intelligent control of lamp and exhaust fan; with the lamp are limited to operation or working, except reset button and up button, others can work for 3 minutes; fan can be turned on when cylinder is working and operating programs with the speed of 10S per minute;
9. Environment-friendly inner circulation air purification system that can absorb harmful gases;
10. Inner heating control system without water, high precision; 
11. Low power consumption control circuit with power-off protection; display screen can be lit in case of blackouts, and rolling screen prompts blackouts protection;
12. Using imported components that runs smooth, without noise and of ergonomics design
13. Can complete the dehydration of not less than 100 tissues at one time. 

Main Technical Parameters: 
1. Hydraulic cylinder number: 12 (the tenth, eleventh and twelfth are paraffin cylinders); 
2. Capacity of cylinder: 1.8L; 
3. Processing time of a single cylinder: the first can be set within 0 to 99 hours; 
others can be set within   0 to 24 hours;
4. Leachate residence time of cylinder replacement: 10s ~ 90s, and leachate and shaking liquid on the surface of the cylinder;
5. Power supply voltage: AC220V/50HZ; AC110V/60HZ 
6. Power: 1000 VA; 
7. Dimension: 1135 × 480 × 490 mm; 
8. Weight: 88kg;