Digital Ultrasonic Flaw Detector

Features:
→With high light TFT screen, clearly shown in high or low lighting conditions, Chinese function and hotkey operation;
→High performance lithium battery with safety and environmental protection, plug-in module;
→Probe interface:Q9-Q9
→With high speed USB interface, fast transmission, quick adjustment, simple operation
→With function to preset 30 sets of testing parameters, set up with the detection of transverse wave, longitudinal wave, small angle and surface wave;
→With capability to save 1000 sets of testing waveform and data;
→Designed to meet the requirements of EN12668-1：2000 standard
HS600 specifications:
Frequency range：0.5-15MHz、0.5-4MHz、2-8MHz
Gain range：110dB（with 0.1dB、2dB、6dB steps，Automatically setting gain according to echo amplitude）
Vertical linear error：≤3%
Horizontal linear error：≤0.1%
Horizontal resolution：＞40dB（5N14）
Dynamic range：≥36dB
Surplus sensitivity：＞60dB（depth 200mmΦ2 flat hole ）
Testing range：0mm ～6000mm
Rejection range：（0 ～ 80）％，no affection to linearity and gain
Rectangle mode ：Plus, minus, dual or RF wave
Probe mode：Single or dual transducer
Pulse voltage：600V
Damp match：200Ω、500Ω optional
Noise ：＜  80 x  V/
Attenuator precision：＜±1dB/12dB
Sound speed：（100 ～ 20000）m/s
Power voltage：DC 7.2V±10%；AC 220V±10%
Battery duration：working more than 7 hours （lithium battery supply）
Temperature ：（-10 ～ 40）℃
Relative humidity ：（20 ～ 95）% RH
Dimension ：205×138×65（mm）
Weight: 1.5 kg (battery included)

Standard configuration：
1. One HS 600 flaw detector                
2. Two probe wires (Q9-Q9)      
3. One power charge
4. One lithium battery                   
5. One battery charging connecting wire
6. One set of portable work tape               
7. One set of communication line and communication driver software
8. One suitcase                 
9. One copy of manual, certificate and warranty card